☆Overview
Recently, each manufacturers is always researching for
development of an enegy high-efficiency products with
long life, in accordance with the growing awareness of
the resource conservation. The miniaturization and high
density of electronic components are underway, but the
heat generation also increases. As the result, the
product performance will be lower and short-life.
The basic research of materials is regarded as
important in order to exhibiting the best product
performance by suppress the generation of heat and
increasing the energy efficiency.
For "Thermal Design" of basic materials research,
TSS-5X is a simplified measuring instrument which can
measure the emissivity by easy and low-cost.
☆Features
TSS-5X is the measuring instrument which specializes
to the measuring of emissivity by our original
measuring principle. If you want to have advantages
of the differentiation with the competitors as much
as possible, the measuring or the development by
TSS-5X are the best method. And, this will contribute
that your products get a patent.
☆Applications
* Vacuum Furnace
- Aerospace industry (LGCT)
- Thermal management in vacuum
* LED Light (Basic Materials Research)
- Radiation resin composition
- Radiation housing, chassis, frame
- Diode
* Silicon wafer (Single Crystal) for solor cell
* Fire barrier materials which including graphitic films
* Polymer film of Pellicle for Lithography
* Semiconductor (Thermal Design)
* Agriculture (Film)
* Terahertz wave
- Health care
- Medical
- Golf ball
* Low-E Glass (Heat radiation or insulation)
* Nuclear industry
(Surface roughness of inside the pipe, wall of furnace)
* Automobile (Eco car)
* Paint & Ink (Coating uniformity)
☆Specifications
1) Measurement method ;-
Then reflection energy detection method by the
infrared irradiation from the constant temperature
emission source.
2) Measurement range : Emissivity 0.01～1.00
3) Measurement size : φ15mm
4) Measurement distance : 12mm
5) Accuracy : ±1% of full scale
6) Response time : 0.1sec.(0～63%) by recorder output
7) Spectral response : 2～22μm
8) Ambient temp. : +10～45℃
9) Ambient humidity : 35～85% (without dew drop)
10) Recorder output : 100mVFs or 1VFs
11) Display : Digital meter 2 decimal places
12) Supply voltage ;-
TSS-5X : AC100V±10% 50/60Hz 30W
TSS-5XS : AC100～240V±10%
13) Cable length : 3m
14) Dimension & Mass ;-
- Sensor Head : φ51xL137mm, 0.5kg(without cable)
- Main body : H160 x W306 x D230mm, 5.0kg
15) Accesories ;-
- Wooden box for test piece : H83 x W237 x D193mm
1.5kg
- 2pcs test piece as emissivity standard
(Emissivity 0.06 & 0.94)
☆Measuring Environment
1)This TSS-5X can not measure the target which is
through the infrared rays.
2)The conditions of your measurment target are below;-
①Size : more than φ40mm
②Even if your measurement target size is more than
φ40mm, it is possible if the measurement area
touches 3 feet of the sensor head as equivalence
aspect.
③Measurement shape : Flat
3)Please operate this device within 10～45℃.
Especially, please avoid the rapid change of
temperature in the peripheral area of this device.
Because such a rapid change of temperature will
generate error at the measuring value. In the case
of the high precision measurement, keeping fixed
ambient temperature is needed. Please also note the
wind of air-conditioner, because it influences
greatly to measure.
4)The attached standard pieces as accessory become
the standard of the emissivity measurement. Please
keep the clean everytime.
5)The focus of this device is not changeable. When 3
feet of sensor head is customized, exact measurement
can not be done.
6)Also, exists dust, gas, steam, moisture, strong
magnetism and electric field will generate error
at the measurement value. Due to these factors,
this device may be sometimes broken.
7)Ambient temperature of optical sensor head is 70℃
max. Also, that of the measurement indication unit
is 60℃ max.
Contact : Y.Takiguchi
E-mail : takiguchi@minori.tv
|
| 
| 
